PMMA FIBER
•Diameter: 0.25 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 mm
•Core Material: PMMA
•Cladding Material: Fluorinated Polymer
•Numerical Aperture: 0.5
•Operating Temperature Range: -55°C to 70°C
•RoHS/REACH Compliant
•Attenuation: 0.2 dB/m at 650 nm
Product Features
1. Cold light source, non-ultraviolet, without the acceleration of valuable.
2. Separation of light and electricity, safe and reliable application in flammable and explosive occasion.
3. Low power, energy saving and environmental friendly.
4. Flexible transmission, apply in plastic optical fiber lights and projects of plastic optical fiber decoration, can produce colorful and dream-like effect.
5. Cold light source, long life, non-ultraviolet ray, separation of light and electricity.
6. Optical fiber display with lower attenuation and high brightness, full color render, clear vision, lower power, easy recycle and long life etc.
Advatage:
Plastic fibers are light, soft and more resistant to damage (vibration and bending). Plastic fiber has excellent tensile strength, durability and small footprint. These advantages make the successful application of plastic optical fiber in automobile especially important. A typical luxury car interior consists of at least a few kilometers of copper wire and copper cable, greatly increasing the weight and cost. The same is true of planes, trains and all other forms of transportation.
Due to the large diameter and numerical aperture of plastic optical fiber, the light conduction ability is large. Plastic optical fibers have much higher bandwidth capacity than copper transmission media (twisted pair and coaxial cable). The higher the transmission frequency, the lower the cost of using plastic fiber.
Plastic fiber cutting, wiring, bonding, polishing and other processing is easy. Due to its large diameter, plastic fiber installation and connection with devices, light sources, detectors, etc., is easy and low-cost, and can be performed by non-specialists. It takes no more than 1 minute to prepare the plastic fiber connection, and no special tools are required. Even the simplest scissors can be used to cut plastic optical fibers. The plastic fiber transceiver module uses a 650nm wavelength of red light, making it very safe for users to see and easily judge whether the connection is successful. In addition, the connection of plastic optical fiber is not sensitive to dust and debris stored in the end face.
Product application field
1, Application in decoration,
Plastic optical fiber enjoys various colors, flexible transmission, it is widely used in fiber lamps and lanterns, plastic decoration projects which takes the colorful and translunary vision effects.
2, Application in illumination
Plastic optical fiber is applied in illumination which has the advantages of high brightness effects, low attenuation, low heating. Long span, anti-UV performance, safety and reliability, separating electricity from lights. It is widely used in the protection of historic relics, jewelry and dangerous area lighting, such as miner road.
3, Application in screen fiber display
Plastic optical fiber has the advantages of low lights attenuation, high brightness, full chromaticity, vivid vision, especially that low consumption, easy recycle, long span, and suitable for various indoor and outdoor surrounding.
