Anamp jumpers is a common cable termination component, used to connect devices and cables in the fields of communication, computer networks, etc. There are many installation methods, and some common installation methods will be detailed below.

1. Single-line plug-in method: This is a simple method of installation, suitable for a smaller number of jumpers or temporary connections. First, plug the jumper plug into the equipment or interface socket, and then plug the other end into the socket of the target device.

2. Dual-line卡-style installation method: This installation method is suitable for scenarios where two lines are required to connect, such as connecting a series transmission line between two devices. First, insert a line plug into the device that needs to be connected, and plug the other end into the plug socket of the second device. Next, select another set of lines, plug one plug into the remaining plug socket of the first device, and plug the other end into the remaining plug socket of the second device.

3. T-shaped installation method: This installation method is suitable for scenarios where a jumper is needed to connect two devices, such as connecting a switch and a server. First, plug a jumper plug into the plug socket of the switch and plug the other end into the plug socket of the server. Next, plug a plug from another set of jumpers into the remaining plug socket of the switch and plug the other end into the remaining plug socket of the server.

4. Multi-line卡-style installation method: This installation method is suitable for scenarios where multiple devices need to be connected, such as connecting a switch and multiple servers. First, plug a plug into the plug socket of the switch and plug the other end into the plug socket of the first server. Then, select another group of lines, plug one plug into the remaining plug socket of the switch, and plug the other end into the plug socket of the second server. Repeat this process until all devices are connected.

5. Yellow-green wire card installation method: This installation method is generally used to connect the on-line module and the plug board of the equipment. First, plug a yellow-green wire jumpers plug into the plug socket of the on-line module and plug the other end into the plug socket of the plug board. Next, plug one plug of another set of yellow-green wire jumpers into the remaining plug socket of the on-line module and plug the other end into the remaining plug socket of the plug board.

To sum up, the installation methods of Anmpa lines include single-line card-type installation method, double-line card-type installation method, T-type installation method, multi-line card-type installation method and yellow-green line card-type installation method, etc. Different scenarios and needs can choose the appropriate installation method to complete the connection of the jump line, and these methods can also be combined according to the need.